Lifting And Jacking The Vehicle - Geely EC718 2009 Workshop Manual

1-14

Lifting and Jacking the Vehicle

1.3 Lifting and Jacking the Vehicle
1.3.1 Description and Operation
1.3.1.1 Lifting and Jacking the Vehicle
Warning!
Refer to "Vehicle Lifting Notice" in "Warnings and
Notices".
To help avoid personal injury, always use jack stands
when you are working on or under any vehicle that is
supported only by a jack.
Note
When you are jacking or lifting a vehicle at the frame side
rails or other prescribed lift points, be certain that the lift
EC718/EC718RV EC715/EC715RV 10/2009
pads do not contact the catalytic converter, the brake
pipes or the fuel lines. If such contact occurs, vehicle
damage or unsatisfactory vehicle performance may
result. Before you begin any lifting procedure, be sure
the vehicle is on a clean, hard, level surface. Be sure all
the lifting equipment meets weight standards and is in
good working order. Be sure all the vehicle loads are
equally distributed and secure. If you are only supporting
the vehicle at the frame side rails, make sure the lifting
equipment does not put too much stress on or weaken
the frame side rails.
Vehicle Overview