Preparing To Transfer The Printer - Canon TM-355 Online Manual

Hide thumbs Also See for TM-355:

Table of Contents

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a new

For details on installing printer after transfer, see

• Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains.

• When you select Prepare to move, any registered web services will be canceled. After moving your

printer, set up your web services again.

Web service setup

• The maintenance cartridge replacement may be required when you execute the Prepare to

move menu. Prepare the maintenance cartridge in advance while referring below. The number

of maintenance cartridge required varies depending on the amount remaining in the maintenance

cartridge being used.

• If you can move the printer in a level state using casters or something similar, you do not need to

execute Prepare to move.

• Always follow the instructions of the service representative when preparing to transfer the printer.

The following lists transport restrictions by type of transport.

Move on the same floor

Usage Examples: Move indoors by carrying

Transport and storage in low temperature environments: No

Required maintenance cartridges: 1

Transport outdoors

Usage Examples: Transport by vehicle

Transport and storage in low temperature environments: Yes

Required maintenance cartridges: 1

Preparing for Transportation

1. Remove the paper.

Removing the Roll from the Printer

Removing Sheets

2. If touch screen indicates to replace maintenance cartridge, replace maintenance

Replacing the Maintenance Cartridge

Reinstalling the