Brake Pads Wear; Fron Brake Pads - Honda NT700V Deauville Service Manual

MAINTENANCE
Fill the reservnlr wtb DOT 4 h r a k e € r m
a
.
.
sealed container to the casting ledge.
Install the diaphragm, set plate and reservoir cap
and tighten the cap screws.
TORQUE: 1.5 N-m (0.2 kgf-m, 1.1 Ibf-ft)
REAR
it
i n an upright position.
Check the rear brake reservoir fluid level.
Remove the seat (page 3-5).
If the fluid level is near the "LOWER" level mark,
remove the reservoir cap, set plate and diaphragm.
Fill the reservoir with DOT 4 brake fluid from a
Install the diaphragm, set plate and reservoir cap
securely.
BRAKE PADS WEAR
FRONT BRAKE PADS
Replace the brake pads i f either pad is worn to the
wear limit groove.
Always replace the
For brake pad replacement, refer to page 17-14.
to assure even disc
pressure.
"LOWER" LEVEL MARK
BRAKE PADS
WEAR LIMIT GROOVES