Delivery Flapper Solenoid; Removing The Delivery Flapper Solenoid (Sl5); Points To Note When Mounting The Delivery Flapper Solenoid (Sl5); Fixing Cleaning Web Solenoid - Canon iR6570 series Service Manual

Chapter 9

9.5.21 Delivery Flapper Solenoid

9.5.21.1 Removing the Delivery Flapper Solenoid (SL5)

1) Remove the fixing feeding unit from the machine.
2) Remove the outside delivery roller.
3) Remove the sensor support plate (outside delivery sensor/delivery
assembly jam sensor) [1].
4) Disconnect the connector [1], and remove the 2 screws [2]; then, slide
the delivery flapper solenoid [3] to the side to detach.
[3]
[2]
9.5.21.2 Points to Note when Mounting the Delivery
Flapper Solenoid (SL5)
- When mounting the delivery flapper solenoid, be sure to pay attention
to the spatial relationship between the arm [1] of the delivery flapper
solenoid and the arm [2] of the sensor.

9.5.22 Fixing Cleaning Web Solenoid

9.5.22.1 Removing the Fixing Web Solenoid (SL9)

1) Slide out the fixing feeding unit.
2) While pushing the hook shaft [1] found at the rear of the fixing
feeding unit in the direction of the arrow (i.e., toward the front of the
machine), turn the fixing feeding unit releasing lever [2] clockwise to
lock it in place.
9-44
0009-4875
[1]
F-9-138
0009-4961
F-9-139
0009-4880
[2]
3) Remove the screw [1], and detach the knob [2]; then, remove the
screw, and detach the fixing feeding unit releasing lever [4].
[2]
[1]
4) Remove the 2 screws [1], and detach the fixing front cover [2].
[2]
[1]
5) Remove the 2 screws [1], and detach the fixing feeding unit front
[1]
F-9-140
[4]
[3]
F-9-141
F-9-142