Preparation For Mounting The Developing Assembly - Canon imagePRESS C1 P Service Manual

[1]
A B
Default (A) : 30 deg
MEMO:
Angle adjustment is available according to the purpose of use.
9) Attach the detached cover.
- The decurler upper rear cover
- The decurler upper left cover
- The decurler upper cover
- The decurler front cover
10) Attaching the delivery Tray.
11) Attaching the outer delivery roller cover.
2.2.10 Preparation for Mounting the Developing
Assembly
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-
PRESS C1+
1) Open the front door.
2) Pull the shutter lever [1] found at the hopper fully toward you.
[1]
3) Open the toner replacement cover [1].
[1]
4) Free the 2 harnesses from the wire saddle [1].
<Right Side>
C
F-2-57
F-2-58
F-2-59
5) Remove the 2 hopper fixing screws [1] from each side.
<Right side>
0012-6724
<Left side>
Chapter 2
[1]
F-2-60
[1]
[1]
F-2-61
[1]
[1]
F-2-62
2-35