User Maintenance - Canon imagePRESS C1 P Service Manual

2. Paper Type Management Settings
This feature enables to print with most optimal printing characteristics for each paper type by registering the characteristics of each paper type in the printer engine.
Furthermore, parameters such as for curl correction and image position control can be changed for each paper type.
This setting can be found in the following menu tree of the panel setting display.
- Initial Setup / Save key > System Control Settings > Paper Type Management Settings
The details of each setting are shown in the following table.
Display
Default display Name
Default display Category
Default display Grammage
Default display Type
Default display Surface property
Default display Creep (Displacement)
Correct.
Default display Color
Default display Curl correction
Default display Uneven Gloss Correction
Default display Media floatation fan air
volume control
Displayed by service Image position control
switch (*1)
Displayed by service Secondary transfer voltage
switch (*1) control
*1: This item is displayed by executing service mode (COPIER > OPTION > BODY > IMAG-ADJ)

1.2.4 User Maintenance

1.2.4.1 Cleaning
imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+
It is important to keep the machine clean so that its performance may be maintained at a specific level.
Advise the user to clean the following parts on a periodical basis (about once a month).
1. Copyboard Glass/Original Feed Belt
Clean the copyboard glass [1] and the original feed belt [2] with a cloth moistened with water or solution of mild detergent (well-wrung); then, dry wipe them
with a soft, dry cloth.
Item Settings
Enter any name.
Editing prohibited (standard/
custom)
64 to 256 g / m2
Normal* / Index paper /
Punched paper
High-quality paper / recycle
paper / coated paper (one-side)
/ coated paper (both-sides) /
embossed paper / vellum paper
/ film / label / cotton paper
0.00* to 2.00 mm
White*/Blue/Cream/Golden
Yellow/Gray/Green/Ivory/
Orange/Pink/Red/Yellow/
Clear/Other
curl down / curl up (factory
default: 0)
-3 to +2, (factory default: 0):
increase gloss- : decrease gloss
weak / medium / strong
(factory default: medium)
test print output / leading edge
registration position control /
left end registration position
control
+ / - 10 (factory default: 0)
T-1-23
Purpose
To register the thickness of the
paper.
To register the style of the
paper.
To register the type of the
paper.
To control the degree of
displacement for each type of
paper when printed
documents are bound up by
the saddle stitch.
degree of curling of the paper. The degree of curling has
To adjust glossiness of
paper.Changing value
switches the fixing
temperature.
The air volume at which the
paper is fanned can be
modified when faulty feeding
occurs while using the side
paper deck - AA1 or when
uneven transfer occurs.
To controls the image position
on the paper.
To control the secondary
transfer bias when faulty
image (uneven density, white
spot, etc.) occurs.
Remedy Service Mode
7 levels upward and 7
more levels downward.
Select [strong] when jam
or double feeding occurs,
and [weak] when paper
gets curled more than
necessary or when
uneven transfer occurs.
Change the value to a COPIER >
native value. (The value OPTION > BODY
1 in this case translates to > 2TR-RVON
100V.)
Chapter 1
0012-2514
1-31