Statistics Function - Samsung WEC8500 Operation Manual

When the operator configures an encoding method, the APC system automatically
converts the encoding method of the file and allows the exported file to the WEC to be
properly displayed in the PC. In addition, if the file stored in the PC is imported to the
system through the WEC, it is properly processed in the system.
To configure an encoding method, it is possible to select <Administration> in the menu
bar of <WEC Main window> and then configure in <File Management>  <Character
Encoding> in the sub-menus.

Statistics Function

It provides the statistics calculation function for statistics for group optimization.
It collects statistics for each statistical item by AP/radio, radio, WLAN (SSID), device type,
and RF and again by time interval. The time intervals include 5 minutes, one hour, and 24
hours and the statistical value calculated by time is displayed when the statistics items are
retrieved in WEC and CLI.
VoIP Statistics
It shows relevant statistics if VoIP is used with the SIP FMC terminal.
Configuration using CLI
1
WEC8500/configure/network-stats/statistics/voip# enable
2
../network-stats/alert/voip/call-setup# enable
../network-stats/alert/voip/call-setup# threshold 50
3
WEC8500# show network-stats statistics voip configuration
4
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Enable VoIP Statistics.
If the call setup, call drop, and MoS values of specific APs are monitored
for a specific time and such values fail to reach the reference values, an
event can be generated.
ex.) call-setup: If the call setup success rate is less than 50 %, an event
is generated.
Retrieve the status of configuration of the VoIP statistics.
Retrieve the status of configuration of the VoIP alert.
490