Figure 238. Manual Remove Change Window In Ap Detail Screen - Samsung WEC8500 Operation Manual

Figure 238. Manual Remove Change Window in AP Detail Screen
Unauthorized AP detection option
Operator can enable or disable the AP detection option pre-defined in the system.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device# ap
WEC8500/configure/wi/device/ap#
2
The description of OPTION parameter is as follows:
station
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  wi  device  ap configuration mode.
Using the following command, configure the unauthorized AP detection
option.
o [OPTION] [NOTI_TYPE]
Parameter
OPTION
NOTI_TYPE
Parameter
ap-blacklist-check
honeypot-with-unmanaged-
Description
Unauthorized AP detection option
Event save option
• notify: Notify the state with alarm
• detect: Save the state with sys log
Description
Allocates ID = 901 by checking an AP included in the
black list.
Allocates ID = 902 by checking Honeypot and
unmanaged station is association status.
365