Samsung WEC8500 Operation Manual page 82

capability
compatible
default-information
default-metric
distance
distribute-list
exit
host
max-concurrent-dd
maximum-area
neighbor
network
ospf
overflow
passive-interface
redistribute
protocol
router-id
summary-address
timers
3
WEC8500/configure/router/ospf 2# router-id ?
A.B.C.D
WEC8500/configure/router/ospf 2# router-id 10.10.0.1 ?
<cr>
4
WEC8500/configure/router/ospf 2# auto-cost ?
reference-bandwidth
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth ?
1 - 4294967
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200 ?
<cr>
WEC8500/configure/router/ospf 2# auto-cost reference-bandwidth 200
5
WEC8500/configure/router/ospf 2# capability ?
opaque
WEC8500/configure/router/ospf 2# capability opaque ?
<cr>
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Enable specific OSPF feature
OSPF compatibility list
Control distribution of default information
Set metric of redistributed routes
Define an administrative distance
Filter networks in routing updates
Exit from router mode
OSPF stub host entry
Maximum number allowed to process DD concurrently
Maximum number of ospf area
Specify a neighbor router
Enable routing on an IP network
OSPF specific commands
Control overflow
Suppress routing updates on an interface
Redistribute information from another routing
Router-id for the OSPF process
Configure IP address summaries
Adjust routing timers
Router ID configuration
Enter an IP address to use.
OSPF router-id in IP address format
Parameter
OSPF router-id in IP address
AUTO COST configuration
Enter an OSPF cost value (1-4294967) to use.
Use reference bandwidth method to assign OSPF cost
The reference bandwidth in terms of Mbits per second
Parameter
reference-bandwidth
CAPABILITY OPAQUE configuration
Enter the capability opaque.
Opaque LSA
Description
Enter an IP address.
Description
Enter a value from 1-4294967.
63