Figure 167.
Option 82 Configuration (2)
After unchecking the GLOBAL USE check box in the DHCP part, configure OPTION 82
STATE and OPTION 82 TYPE and then click the <Apply> button.
In the OPTION 82 STATE, configure Enable/Disable for Option 82 and configure ap-mac,
ap-mac-ssid, or ap-ethermac for OPTION 82 TYPE.
Primary/Secondary Server Configuration
The DHCP relay/proxy can transmit a DHCP packet received from a client through
broadcast to maximum two DHCP servers. Here, the two servers are called primary and
secondary server respectively.
The configuration of primary/secondary servers can be done in the interface mode, but it
is also possible in the global mode. If the configuration exists in both the interface and
global mode, the configuration in the interface mode has a higher priority.
Configuration using CLI
[Configuration at Interface]
1
WEC8500# configure terminal
WEC8500/configure# interface [INTERFACE_NAME]
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure interface mode of CLI.
Enter the 'dhcp server' command.
To configure only a primary server, do not enter the information of a
246