Samsung WEC8500 Operation Manual page 371

3
WEC8500/configure/security/radius 1# mac-auth-delimiter [DELIMITER_TYPE]
4
WEC8500/configure/security/radius 1# mac-auth-case [CASE_TYPE]
5
WEC8500/configure/security/radius 1# exit
WEC8500/configure/security# exit
6
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select
<Security>  <AAA>  <RADIUS> menus in the sub-menus.
After selecting a RADIUS server to configure, configure the MAC authentication item.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Parameter
Set the type of separator of the device's MAC string which is used as a
user ID when the MAC authentication of the device is performed.
Parameter
DELIMITER_TYPE
Configure whether to use lowercase characters or uppercase characters
for the device's MAC string that will be used as an ID upon the MAC
authentication of the device.
Parameter
CASE_TYPE
Exit RADIUS server configuration and then security configuration mode.
You can view configuration information by using the 'show security
radius-server detail <server-id>' command.
Description
authentication of the device is performed
• shared-secret: Key shared between the APC and
RADIUS server
Description
Type of the MAC string separator (default: none)
• none: no separator (xxxxxxxxxxxx)
• colon: Uses ':' as a separator (xx:xx:xx:xx:xx:xx)
• hyphen: Uses '-' as a separator (xx-xx-xx-xx-xx-xx)
• single-hyphen: Uses only one '-' in the middle (xxxxxx-
xxxxxx)
Description
Case type of the device's MAC string (default value:
lower)
• lower: Uses lowercase
• upper: Uses uppercase
352