File Management - Samsung WEC8500 Operation Manual

File Management

The APC provides the file management functions of copying, moving, or retrieving a file
and also file download and upload. In addition, it checks the integrity of a package file and
provides version retrieving method.
To use a file related command, go to the file mode first. The command is basically used
as follows:
1
WEC8500# file
WEC8500/file#
2
d
Retrieving Configuration of Current Directory
The file management command supports both a relative path and an absolute path based
on the current (working) directory. The current directory is a path that is a reference of a
relative path. For example, if the current directory is 'disk:/', the 'copy test1 test2' is the
same as the 'copy disk:/test1 disk:/test2' command.
To retrieve a current directory, enter the 'pwd' command.
WEC8500/file# pwd
disk:/
To change a directory, use the 'cd [TARGET_DIR]' command.
WEC8500/file# cd etc
WEC8500/file# pwd
disk:/etc
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the file mode of CLI.
Use each command. The following commands are used in the file mode.
Comman Description
cd Changes the current directory.
copy Copies a file.
df Retrieves the brief information of a storage media connected to the system.
download Downloads a file using FTP protocol.
dump Shows the content of a file.
ls Retrieves the list of files or directories in a specified path.
move Changes the name of a file.
pwd Shows the current directory.
remove Deletes a file.
upload Uploads a file using FTP protocol.
verify Checks the integrity of a package file and shows the result.
version Shows the information of a package file.
484