Samsung WEC8500 Operation Manual page 97

WEC8500/configure/router/ospf 1# area 2 nssa default-information-originate translator-
role candidate ?
no-redistribution
no-summary
<cr>
WEC8500/configure/router/ospf 1# area 2 nssa default-information-originate translator-
role never ?
no-redistribution
no-summary
<cr>
WEC8500/configure/router/ospf 1# area 2 nssa default-information-originate translator-
role never
After the configuration of each parameter is finished, enable or disable the no-
redistribution or no-summary parameter.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Area>  <NSSA> menu in the sub-menus.
The default window is shown below.
The default configuration screen is shown below.
The NSSA window screen is shown as below after detail configuration is completed.
If you select a Process ID after NSSA default configuration, operator can do detail
configuration.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
No redistribution into this NSSA area
Do not send summary LSA into NSSA
No redistribution into this NSSA area
Do not send summary LSA into NSSA
Parameter
always
candidate
never
Description
Translate always
Candidate for translator (default)
Do not translate
78