Ap Package Upgrade; Figure 129. Outdoor Ap Create Window - Samsung WEC8500 Operation Manual

CLI.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure#
2
3
4
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select the
<Access Points> menu in the sub-menus. To create an outdoor AP, click <Add>, select
<3rd Party Outdoor AP>, enter AP PROFILE NAME, MAC ADDRESS, and IP
ADDRESS, and then select <Apply>.
Figure 129. Outdoor AP Create Window

AP Package Upgrade

Configuration using CLI (Upgrade Function)
To manage the AP upgrade function, execute the command as follows:
1
WEC8500# configure terminal
WEC8500/configure# ap ap_1
2
WEC8500/configure/ap ap_1# upgrade-request weafama_4.6.0.R.bin
WARNING: AP will be upgrade.
Are you sure you want to continue? (y/n) : y
WEC8500/configure/ap ap_1#
3
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Create or delete an AP. Use the 'no' parameter in front of the command
to delete an outdoor AP.
o outdoor-ap [PROFILE_NAME] [MAC_ADDRESS] [IP_ADDRESS]
o no outdoor-ap [PROFILE_NAME]
Create or delete an outdoor AP. Use the 'no' parameter in front of the
command to delete an outdoor AP.
Use the 'show ap summary' command to check the outdoor AP
information.
Go to configure  AP configuration mode of CLI.
Request the image file of an AP to upgrade.
To check the upgrade file information of the requested AP, use the
189