Samsung WEC8500 Operation Manual page 304

Item
period
attempts per channel
which scan is attempted
An example of using the command for each configuration item is as follows:
WEC8500/configure# handover opmode APP
WEC8500/configure# handover buffered-forwarding enable
WEC8500/configure# handover decision-delta 10
WEC8500/configure# handover scan-time-channel 10
WEC8500/configure# handover scan-time-interleave 1000
WEC8500/configure# handover scan-time-service 200
WEC8500/configure# handover scan-report-level -90
WEC8500/configure# handover number-of-proreq 3
WEC8500/configure# handover number-of-channel 4
WEC8500/configure# handover scan-trigger-level -65
WEC8500/configure# handover station-decision-delta 10
To check the configuration information, use the 'show handover configuration' command.
[AirMove Enable/Disable Configuration]
The AirMove is enabled by default, so use the following command to disable it:
•
To check the configuration information, use the 'show handover configuration' command.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
AirMove Configuration
Service time in scanning
scan report level
Numbers of handover scan
Number of channels for
scan trigger level
station decision delta
no handover mode NCHO
Description
• OPTION: scan-time-interleave
• OPTION_DETAIL: Time (ms)
Configures a period
transmits/receives actual data traffic after scanning.
• OPTION: scan-time-service
• OPTION_DETAIL: Time (ms)
Configures the threshold of a scan report that will be
transmitted from an AP to the APC.
• OPTION: scan-report-level
• OPTION_DETAIL: scan report level (dBm)
Configures the scanning times of a wireless terminal per
channel.
• OPTION: number-of-proreq
• OPTION_DETAIL: Number of times
Configures the number of channels a wireless terminal
will scan at a time.
• OPTION: number-of-channel
• OPTION_DETAIL: Number of channels
RSSI intensity at which a wireless terminal starts channel
scanning
• OPTION-trigger-level
• OPTION_DETAIL: RSSI (dBm)
Configures the threshold of RSSI difference, measured in
a wireless terminal, between a serving AP and a target AP.
If the threshold is exceeded, a wireless terminal performs
its handover.
• OPTION: station-decision-delta
• OPTION_DETAIL: Threshold (dBm)
when a wireless terminal
285