Samsung WEC8500 Operation Manual page 193

WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
o ap-mode [generalAp/rootAp/repeaterAp/snifferAp]: Configures the
AP operation mode.
o ap-stats-history-enable: Configures whether to enable the AP
statistics history.
o client-ip [IP_ADDRESS]: Configures the client IP address, if the AP
operation mode is set to Sniffer AP.
o console-enable: This configures whether to allow console access to
the AP.
o discovery
[ap-followed/apc-referal/multicast/broadcast/DHCP]:
Configures the discovery type of an AP to find APC.
 ap-followed: Finds the APC using the discovery type and
discovery list configured in an AP.
 apc-referral: Uses the APC list information configured in an APC
as the discovery list
 DHCP: Uses the APC list information that is received through
DHCP option 138 (IPv4) or option 52 (IPv6) as the discovery list.
 auto: Discovery type is automatically changed by the AP for
automatic connection to the APC.
o discovery-interval [INTERVAL]: Configures the time waiting for a
CAPWAP discovery response message (unit: seconds)
o dtls-policy: Configures the DTLS Policy of an AP.
o echo-interval [INTERVAL]: Configures the time when an AP transmits
an echo request to the joined APC (Unit: seconds)
o echo-retransmit-interval [INTERVAL]: Waiting time to retransmit an
echo request message if there is no reply. The APC configures the
echo timeout as much as two times of echo-interval. If the APC
cannot receive an echo message from an AP until two times of echo-
interval is elapsed, the APC assumes that the AP is down (Unit:
seconds)
o edge-ap: Configures whether to enable the Edge AP function.
o edge-ap-opmode: Smart Handover is enabled as operation mode of
the
In RSSI mode, handover is determined by looking up the RSSI value.
In Force mode, handover is performed by force.
o edge-ap-threshold: Configures a threshold value for performing
smart handover at the edge AP (range: -60 to -100 dBm, default: -80
dBm).
o edge-ap-window: Configures a window value for performing smart
handover at the edge AP (range: 200-1000 ms, default: 200 ms).
o fragment-size [SIZE]: Configures a fragment size based on MTU to
prevent the fragmentation of a CAPWAP packet that is transmitted
by an AP to the APC.
o ip-mode [dhcp/static/ap]: Configures the IP address of an AP to
edge AP.
174