Controlling Usage Per User - Samsung WEC8500 Operation Manual

Controlling Usage per User

A wireless terminal can control traffic usage per user by receiving a QoS profile that
specifies traffic usage (bandwidth) from the RADIUS server at the authentication stage.
You can configure upward and downward usage per wireless terminal.
Configuration using CLI
The procedure of configuring a usage to a profile is as follows:
1
APC# configure terminal
2
APC/configure# qos [PROFILE_NAME]
APC/configure/qos samsung#
3
4
5
Configuration using Web UI
In the menu bar of <WEC Main window>, select <CONFIGURATION> and then select
the <WIRELESS QOS>  <User QoS> menu in the sub-menus. To create a QoS profile
to apply to a terminal, click the <Add> button in the initial window.
The QoS addition window consists of the following QoS parameters. By entering each
QoS parameter, you can configure the QoS profile of a specific terminal or configure the
usage control function for each user.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Create a QoS profile.
Parameter
PROFILE_NAME
Configure the downward usage in kbps.
o bw-contract-downstream [VALUE]
Parameter
VALUE
Configure the upward usage in kbps.
o bw-contract-upstream [VALUE]
Parameter
VALUE
To check the configured profile information, use the 'show qos profile'
command.
Description
Name of a QoS profile to create
Description
Downward usage
Description
Upward usage
308