Samsung WEC8500 Operation Manual page 256

[Configuring NTP Server]
Up to 3 IP addresses of a NTP server can be configured or deleted. In addition, use the
'no ntp-server all' command to delete all the configured addresses of a NTP server.
•
•
•
[Configuring NTP Server]
Up to 3 IP addresses of a NTP server can be configured.
•
[Ping check]
When a DHCP server allocates an IP address to a client, ping check can be used to check
if an IP address to allocate is being used in the current network.
•
[Configuring IP Address Range]
A DHCP server configures the range of IP address to allocate to a client. The range of IP
address to add is up to 16 and the IP address specified in the range cannot be duplicated
with the IP address of fix-address. Enter 'no' to delete the range of configured IP address
and enter 'no range all' to delete all the ranges.
•
•
•
•
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
ntp-server [IP_ADDRESS]
no ntp-server [IP_ADDRESS]
no ntp-server all
Parameter
IP_ADDRESS
ntp-server [IP_ADDRESS]
Parameter
IP_ADDRESS
ping-check [enable/disable]
Parameter
enable/disable
range [IP_ADDRESS]
range [IP_ADDRESS1] [IP_ADDRESS2]
no range [IP_ADDRESS]
no range [IP_ADDRESS1] [IP_ADDRESS2]
no range all
Parameter
IP_ADDRESS
IP_ADDRESS1
IP_ADDRESS2
Description
The IP address of the NTP server
Description
The IP address of the NTP server
Description
Configures whether to use ping check (default: disable)
Description
IP address. Use to configure one IP address.
Start address of IP address range
Last address of IP address range
237