In case of WEC8050, there is no management (mgmt0) port. After
establishing an IP address in one of ports ge1 to ge4 by referring to the
contents of 'Port Configuration' and then using the CLI, connect the Ethernet
cable to the port.
SNMP Community Configuration
To connect to the web server of APC, it is necessary to add Simple Network Management
Protocol (SNMP) community through CLI. For more information, see 'SNMP Configuration'
part in 'System Management' Chapter.
CLI Basic Usage
The CLI is a text command based interface used to change or retrieve the system
settings. Several users can change the settings at the same time using the CLI of the same
system. Because privilege per user is already configured, a user can execute a command
allowed by the user's privilege. Various commands are available for each system function.
For more information, see ANNEX 'CLI Command Structure'.
Command Help
The CLI provides a help for all the commands. To see a help for a command and
parameter, enter '?'. Based on an input character, it shows a help for a command or
parameter that can be entered.
A usage example is given below.
WEC8500# show ?
80211a
80211bg
80211h
access-list
alarm
ap
ap-debug
...
vap
version
vlan
vqm
vrrp
wids
wips
wireless-acl-list
wlan
WEC8500#
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Category
?
Command ?
Display 802.11a network settings
Display 802.11bg network settings
Display 802.11h configuration
List IP access lists
Show alarm information
Show ap information
Show ap debug information
Show vap information
Show package version information
Display VLAN information
Show vqm command
VRRP information
Wids command
Wips command
Show wireless-acl-list
Show wlan information
Description
Displays the command list and help at the current level
Displays the parameter and help required for a command
21