Figure 184. 802.11A/B/G/N Radio (2) - Samsung WEC8500 Operation Manual

In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n/ac> or <802.11b/g/n>  <802.11h> menu in the sub-menus.
An example of selecting 802.11a/n/ac is shown below.
Figure 184. 802.11a/b/g/n Radio (2)
[General]
•
•
•
•
•
[Data Rates]
The data rate selection options are as follows:
•
•
•
Select <Configuration> in the menu bar of <WEC Main Window> and select <WLANs>
 <WLANs>  <802.11a/n/ac> or <802.11b/g/n> in submenus to configure Data Rates.
Select <Configuration> in the menu bar of <WEC Main Window> and select <Radio>
 <802.11a/n/ac> or <802.11b/g/n> in submenus to configure Data Rates.
An example of selecting 802.11a/n/ac is shown below.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
BANDWIDTH: Configures bandwidth (range: 20, 40, 80). Available for
802.11a/n/ac only.
BEACON PERIOD: Beacon period (range: 40-3500)
FRAGMENTATION THRESHOLD: AP fragmentation threshold (range:
256-8000)
MAX. CLIENT COUNTS: Limits the number of connected clients per
radio
CONTROLLED VOICE OPTIMIZATION: Configures voice optimization.
Basic: Basic rate supported for a terminal to connect to an AP.
Supported: A connected terminal that supports the supported rate can
communicate with an AP at the supported rate.
Data Rates: data rate
o Range for 80211a: 6, 9, 12, 18, 24, 36, 48, or 54 Mbps
o Range for 80211bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps
261