Configuration Of Multiple Apc For Redundancy - Samsung WEC8500 Operation Manual

The basic W-EP wireless LAN network configuration is a centralized structure where all
the wireless user traffics go through tunnelling between APC and W-EP wireless LAN AP.
Therefore, the network information such as subnet information allocated to a wireless
user depends on the configuration of backbone network where the APC is connected.
This provides the following advantages during network configuration and setup:
•
•
•

Configuration of Multiple APC for Redundancy

The APC provides the redundancy function to guarantee QoS for various services and
provide service stability in the W-EP environment.
An example of service configuration diagram for redundancy is shown in the below figure.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Installing the APC is just adding it to a legacy data center or backbone
network. Therefore, the possibility of physical change of core network
can
In addition, separate design of wire/wireless network is easy using the
APC as a boundary.
No dramatic network change is required to install the W-EP wireless LAN
AP.
An AP installed in a user area is located in various local network
environments in a wide region. Although it is unavoidable to install or
expand a PoE switch, the modification of local network where wire users
are already configured can be minimized.
Because the APC relays all the user traffics, it can restrict a wireless
attacker's effects and provide differentiated service for each user.
be reduced.
12