Samsung WEC8500 Operation Manual page 515

WEC8500# show network-stats statistics data ap-stat 1
3
WEC8500# show network-stats statistics data ap-stat 1 rtp
4
WEC8500# show network-stats statistics data apc-stat
5
WEC8500# show network-stats statistics data apc-stat rtp
6
WEC8500/configure/network-stats/alert/data# packet-loss-alert enable
7
WEC8500/configure/network-stats/alert/data# packet-retry-alert enable
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select <
Statistics>  <Network Quality>  <APs>  <802.11a/n/ac>  <Data Traffic> in the
sub-menus.
Station Statistics
They provide the statistics of the network optimization to check service, tracking,
debugging, status transition, and more of a station. Main statistics items provided include
station latency upon connection and handover, attempt count, statistics by failure reason,
RSSI, success rate, data rate by AP, Disassoc/Deauth statistics, statistics by reason,
handover path statistics, kickout statistics by AP, number of users and scanning statistics
by AP. They provide such statistics by 5 min., one hour, 24 hours, and total period by
WLAN, AP, Radio, and Device Type.
Configuration using CLI
1
APC# configure terminal
APC/configure# network-stats statistics station enable
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
To retrieve the statistical information of RTP of a specific AP, give a RTP
option as follows:
To retrieve the statistical information of all APs, enter as follows:
To retrieve the statistical information of RTP of all APs, give a RTP option
as follows:
To generate a packet loss alert from the AP, enter as follows:
To generate a packet retry alert from the AP, enter as follows:
Enable or disable station network statistics.
o network-stats statistics station [MODE]
Parameter
Mode
Description
Whether to configure network statistics
• enable: Setting
• disable: Release (by default)
496