Samsung WEC8500 Operation Manual page 87

WEC8500/configure/router/ospf 2# distance admin 100
3
WEC8500/configure/router/ospf 2# distance ospf ?
external
inter-area
intra-area
WEC8500/configure/router/ospf 2# distance ospf external ?
1 - 255
area routes
WEC8500/configure/router/ospf 2# distance ospf external 50
WEC8500/configure/router/ospf 2#
4
WEC8500/configure/router/ospf 2# distance ospf inter-area ?
1 - 255
routes
WEC8500/configure/router/ospf 2# distance ospf inter-area 50 ?
<cr>
WEC8500/configure/router/ospf 2# distance ospf inter-area 50
WEC8500/configure/router/ospf 2#
5
WEC8500/configure/router/ospf 2# distance ospf intra-area ?
1 - 255
routes
WEC8500/configure/router/ospf 2# distance ospf intra-area 50 ?
<cr>
WEC8500/configure/router/ospf 2# distance ospf intra-area 50
WEC8500/configure/router/ospf 2#
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <General> menu in the sub-menus.
Click a PROCESS ID that user wants to configure. The OSPF configuration window is
shown below.
Use the value configured in 'Configuration using CLI' as a user-defined value in the below
screen.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
The OSPF Admin distance is displayed as GENERAL in the Web UI.
Configuration of EXTERNAL distance ospf
Enter the OSPF EXTERNAL distance value.
External routes
Inter-area routes
Intra-area routes
<1-255> Distance for external/inter-area/intra-
Configuration of INTER-AREA distance ospf
Enter the OSPF INTER-AREA distance value.
<1-255> Distance for external/inter-area/intra-area
Configuration of INTRA-AREA distance ospf
Enter the OSPF INTRA-AREA distance value.
<1-255> Distance for external/inter-area/intra-area
68