Samsung WEC8500 Operation Manual page 289

802.1p
6, 7
4, 5
0, 3
1, 2
6
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <QoS> menu in the sub-menus.
1
2
3
4
5
6
Wireless Section
The system can provide QoS service in a wireless section for each AP downward packet
type (voice, video, best effort, background). You can configure 802.1p and DSCP tag
which are the criteria used to select access category.
Configuration using CLI
1
APC# configure terminal
APC/configure# [80211a/80211bg] qos
APC/configure/80211a/qos#
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Parameter
The packet judgment criteria are as follows: For example, if the packet
type is voice, the 802.1p input value is 6 or 7 and the input range of
DSCP value is 46-63.
Also, if the packet type is video, the 802.1p input value is 4 or 5 and the
input range of DSCP value is 24-45.
DSCP
46~63
24~45
0~7, 16~23
8~15
To check the configured policy and QoS parameter information per
packet, use the 'show 80211a[|80211bg] qos policy' command.
Select one out of None/Default/User Priority in the 802.1P POLICY drop-
down list of Tagging Policy.
To disable a DSCP policy in the DSCP POLICY, select Disable.
To enable a DSCP policy in the DSCP POLICY, select Enable.
a
Select one out of Inner Packet/Default Value in the OUTER DSCP
drop-down list.
b Select one out of No Mark/Default Value in the INNER DSCP drop-
down list.
Select one out of None/802.1p/DSCP in the PROTOCOL drop-down list.
Enter 802.1p or a DSCP value into the QoS Default Values.
Click the <Apply> button to apply.
Go to configure  QoS mode of a wireless section of CLI.
Description
incoming packet.
Packet type
voice
video
best effort
background
270