Figure 237. List Window To Manually Remove - Samsung WEC8500 Operation Manual

Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device#
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Wireless Intrusion>  <AP> menu in the sub-menus. And when the AP list is displayed,
check a desired MAC in the list and click the <Remove> button to manually remove an
AP.
In addition, after going into the detail view screen by selecting one out of the AP list,
operator can also remove an AP by changing the REMOVE MANUALLY option to On.
1
Figure 237. List Window to Manually Remove
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  wi  device configuration mode of CLI.
By using the MAC of an unauthorized AP to change, execute the remove
command.
o remove [MAC]
Parameter
MAC
To check the changed configuration, use the following command:
o show wi device ap list removed
In the AP list screen, operator can change the status of several APs to
'Removed' by clicking <Remove> button.
If you change the setting of REMOVE MANUALLY to 'On' in the AP detail
screen and click Apply, the AP status is changed to 'Removed'.
Description
MAC address of an unauthorized AP
364