System Resource Management - Samsung WEC8500 Operation Manual

System Resource Management

Retrieving System Status
Retrieving with CLI
By using the 'show system' command, you can check the status of each system resource
such as CPU load, memory usage, disk usage, Fan RPM level, or system temperature.
•
•
•
•
•
The result of system status retrieval using each command is as follows:
[CPU Load]
The retrieving CLI execution result of WEC8500 is as follows:
WEC8500# show system cpu
Average CPU usage
control plane
data plane
WEC8500# show system cpu detail
-----------------------------------------------------------------
Average CPU usage
control plane
data plane
-----------------------------------------------------------------
Detail CPU usage
control plane
[10.00] [04.23] [00.00] [02.74] [00.00] [00.00] [00.00] [00.00]
data plane
[00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00]
[00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00] [00.00]
The retrieving CLI execution result of WEC8050 is as follows:
WEC8050# show system cpu
Average CPU usage
control plane
data plane
WEC8050# show system cpu
-----------------------------------------------------------------
Average CPU usage
control plane
data plane
-----------------------------------------------------------------
Detail CPU usage
control plane
[23.29] [25.71] [16.90]
data plane
[00.01] [00.00] [00.00]
[Memory usage]
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
show system cpu: Retrieves CPU load. If there are several cores, the
CPU load of each core is displayed.
show system memory: Retrieves memory usage.
show system disk: Retrieves disk usage.
show system fan: Retrieves system fan speed (RPM level range: 0-3)
show system temp: Retrieves system temperature (°C).
(%)
: 3.84
: 0.00
(%)
: 39.43
: 0.01
detail
(%)
2.12
0.00
(%)
(%)
21.97
0.01
(%)
451