Figure 264. Firewall Configuration (2); Figure 265. Access-List Configuration - Samsung WEC8500 Operation Manual

Figure 264. Firewall Configuration (2)
Access List Configuration
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure#
2
(SRC_PORT)
(DST_PORT)
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <Firewall>  <Policy> menu in the sub-menus. Click the <Add> button
to configure the firewall Policy.
Figure 265. Access-list Configuration
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Create an access-list.
o access-list
fw
(SRC_PORT)] [DST_ADDRESS (DST_PORT)] [PROTOCOL]
Parameter
ACL_NAME
ACTION
SRC_ADDRESS
DST_ADDRESS
PROTOCOL
[ACL_NAME] [ACTION]
Description
ACL name to configure
Action configuration (deny/permit)
Source IP address and port
Destination IP address and port
Protocol
[SRC_ADDRESS
392