10
WEC8500/configure/router/ospf 2# timers ?
spf
WEC8500/configure/router/ospf 2# timers spf ?
exp
WEC8500/configure/router/ospf 2# timers spf exp ?
0 - 2147483647
calculation in
WEC8500/configure/router/ospf 2# timers spf exp 3 ?
0 - 2147483647
calculation in
WEC8500/configure/router/ospf 2# timers spf exp 3 100 ?
<cr>
WEC8500/configure/router/ospf 2# timers spf exp 3 100
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <OSPF> <General> menu in the sub-menus.
Click a PROCESS ID that user wants to configure. The OSPF configuration window is
shown below.
Use the value configured in 'Configuration using CLI' as a user-defined value in the below
screen.
The value configured in 'Configuration using CLI' is shown in the below screen.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
SPF TIMER (MILLISECONDS) configuration
Configure the SPF TIMER (MILLISECONDS) value.
OSPF SPF timers
Use exponential backoff delays
Minimum Delay between receiving a change to SPF
milliseconds
Maximum Delay between receiving a change to SPF
milliseconds
65