Samsung WEC8500 Operation Manual page 401

8
9
10
11
WEC8500# show wlan security detail 1
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID in the WLANs screen and go to
<L3> on the <Security> tab.
Enable <WEB POLICY>, select the Web Authentication option, and specify the Pre-Auth
ACL configured in the ACL for <PRE-AUTHENTICATION ACL>. Specify a web page type
to authenticate.
Select <Server Type>, and select a Radius server to perform authentication from
<Primary/Secondary Radius Server>.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
o radius-servers [Radius ID] [Radius ID]
Parameter Description
Radius ID Radius ID used for authentication
(1~48, 255 (internal server))
Configure the Ldap Server
o Ldap-Server [LDAP ID]
Parameter Description
LDAP ID LDAP ID used for authentication (1~48)
Configure the Cache Duration.
o cache-duration [Days]
Parameter Description
Days Cache validity since authentication
Configure the After Authentication Type.
o after-auth [Auth Type]
Parameter Description
Auth Type Operation after authentication
• redirect: Redirect to a specified URL.
• request: Redirect to a requested URL.
o after-auth-redirect-url [URL]
Parameter Description
URL Redirect URL if after auth type is redirect
The configuration can be checked using the 'show wlan security detail'
command.
382