Samsung WEC8500 Operation Manual page 255

[Configuring Domain Name]
This command configures a domain name.
•
[Configuring Fixed IP Address to MAC Address]
This command configures a fixed IP address to a specific MAC address or deletes the
configuration.
The 'range' of IP address to configure cannot be overlapped with the IP range and
maximum 255 IP addresses can be configured. In addition, use the 'no fix-address all'
command to delete all the configured values.
•
•
•
As shown in the below example, 100.100.100.10 can be always allocated to the IP
address of a wireless terminal whose MAC address is 11:22:33:44:55:66.
WEC8500/configure/ip/dhcp/pool test# fix-address 11:22:33:44:55:66 100.100.100.10
[Configuring IP Address Lease Time]
Configure the time when a wireless terminal receives an IP address. The 'lease infinite'
command configures the time infinitely. If 'no' parameter is entered in front of the
command, it is configured to 24 hours (default).
•
•
•
[Configuring IPV6 Address Lease Time]
Configure the time when a wireless terminal receives an IP address.
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Parameter
domain-name [DOMAIN]
Parameter
DOMAIN
fix-address [aa:bb:cc:dd:ee:ff A.B.C.D]
no fix-address [aa:bb:cc:dd:ee:ff A.B.C.D]
fix-address all
lease [TIME]
lease infinite
no lease
Parameter
TIME
lease [TIME]
Parameter
TIME
Description
APC.co.kr)
Description
Domain name to configure (For example, samsung
APC.co.kr)
Description
Lease time (range: 120-8640000, Unit: s)
Description
Lease time (range: 120-8640000, Unit: s)
236