Figure 251. List Window For Blocking Ap - Samsung WEC8500 Operation Manual

Configuring Manual Blocking
To configure manual blocking, execute the command as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# containment
WEC8500/configure/wids/containment#
2
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select <Wireless
Intrusion> menu in the sub-menus.
Select the target and perform containment to perform manual blocking.
1
Figure 251. List Window for Blocking AP
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Blocking Method Description
Manual blocking The administrator performs blocking manually to APs or UEs.
Automatic blocking APs or UEs are automatically blocked by the policy defined by the
administrator.
Go to configure  wids  containment configuration mode of CLI.
Configure manual blocking.
o manual [TARGET] enable [MAC]
Parameter Description
TARGET Select either AP or station which is the target for manual blocking.
MAC MAC address of the target for manual blocking
After selecting an AP in the AP list, possible to block by using the
containment.
After selecting a station in the station list, possible to block by using the
375