Remote Ap Package Upgrade; Figure 133. Ap Upgrade-Advanced - Samsung WEC8500 Operation Manual

Figure 133. AP Upgrade-Advanced
•
•
•
•

Remote AP Package Upgrade

APs in a remote group can be upgraded by downloading an AP package from a specific
AP.
This is useful for efficient management of APC-AP bandwidth.
A master AP can be selected for each AP package model. After downloading an AP
package from the APC, the master AP allows the AP package to be downloaded to other
APs in the remote group.
The operator can manage AP upgrade of the APs in the remote group by checking the
AP package download status in the remote group and performing reboot and upgrade.
Activating Upgrade
The operator can enable/disable the AP upgrade in the remote group.
When the AP upgrade is enabled, version priority in AP upgrades status changes to
Remote.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group rUpgrade
WEC8500/configure/ap-group rUpgrade# remote
WEC8500/configure/ap-group rUpgrade/remote# upgrade
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
TRANSFER MODE: Selects a protocol that transmits an AP package.
MAX DOWNLOAD: Configures maximum number of sessions that can
be downloaded simultaneously.
MAX RETRY: Configures maximum number of re-attempts when AP
upgrade is failed.
DEFAULT AP PACKAGE: Select an AP package that will be used for
automatic upgrade during AP joint.
194