Samsung WEC8500 Operation Manual page 257

[Configuring IPV6 Address Range]
A DHCPV6 server configures the range of IP address to allocate to a client.
Configured IP address must be included network range. Invalid address is not set.
•
[Capwap Access Controller Address Configuration]
Up to three IP addresses for a Capwap controller can be configured or deleted. Also, all
Capwap controller addresses can be deleted using the 'no capwap-dhcp-option'
command.
•
•
[Capwap Access Controller IPV6 Address Configuration]
Configure the IP Address of Capwap Controller.
•
[Configuring Option Data]
Use the 'user-option' command to configure or delete the DHCP option. Use 'no' to delete
each option and use 'no user-option all' to delete all the options.
•
•
•
• user-option [1-254] string [string] [active/passive]
• user-option [1-254] octet aa:bb:cc [active/passive]
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
range [START_IPV6_ADDRESS] [END_IPV6_ADDRESS]
Parameter
START_IPV6_ADDRESS
END_IPV6_ADDRESS
capwap-dhcp-option [IP_ADDRESS]
no capwap-dhcp-option
Parameter
IP_ADDRESS
capwap-dhcp-option [IP_ADDRESS]
Parameter
IP_ADDRESS
Option: Up to 254 can be entered (1-254).
Data type: string (character string), octet (hex string), int (32 bit integer),
uint (32-bit unsigned integer), int16 (16-bit integer), uint16 (16-bit
unsigned integer), ipaddress (IP address)
Mode: Can be configured to the active/passive mode.
o active: Although a client does not request data transmission, the
DHCP server transmits user-option data (Default).
o passive: The DHCP server transmits data upon a client's request.
Command
Description
Start address of IPV6 address range
End address of IPV6 address range
Description
IP address of the Capwap Controller
Description
IP address of the Capwap Controller
Description
Configures an option.
238