Figure 9. Status Led Configuration; Figure 10. Ethernet Port Configurations - Samsung WEC8500 Operation Manual

Figure 9. Status LED Configuration
LED Status
SYS Green
Orange
Red
FAN Green
Orange
Red
PWR Green
Off
Console Port (RS232C)
A console port is provided to check the operational status of WEC8050 or for input through
the CLI.
Its basic requirements are as follows:
•
Default baud rate: 115200 bps
•
Character size: 8 Characters
•
Parity: None
•
Stop bit: 1, Data bit: 8
•
Flow control: None
Ethernet Port
It has 4 10/100/1000 Base-T ports.
Figure 10. Ethernet Port Configurations
LED Status
ACT Orange blinking
Off
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Description
The system is operating normally
The system is now booting
Preparing the system for booting
The installed FAN module is operating normally
The system is now booting
Fan fault
The power is supplied normally
The power is turned off or not supplied
LINK LED ACT LED
Description
Blinking while data exchanging
No data exchanging
9