Samsung WEC8500 Operation Manual page 378

The detected unauthorized APs are classified as follows according to the configured
classification policy.
type
Configuring the managed AP classification policy
To configure the managed type authorized AP classification policy, execute the command
as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device#
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Policy>  <User Defined Rule> menu in the sub-menus. And
then, select <Managed> at the upper tab.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Classification Description
Managed AP AP that is allowed to be used by an administrator among the
detected unauthorized APs
• Configures the managed AP classification policy.
• An administrator can classify a specific AP as a managed AP
among the manually detected unauthorized APs.
Unmanage AP AP that is not allowed to be used by an administrator among the
detected unauthorized APs and AP that can be used maliciously
• Configures the unmanaged AP classification policy.
• An administrator can classify a specific AP as a unmanaged AP
among the manually detected unauthorized APs.
Go to configure  wi  device configuration mode of CLI.
Configure the managed type authorized AP policy.
o add-classification-rule- managed [RULE_NAME] enable [PRIORITY]
[SSID_TYPE] [SSID]
Parameter Description
RULE_NAME Classification policy name
PRIORITY Priority number
SSID_TYPE SSID type
• managed-ssid: SSID that is used in an authorized AP that is
connected to the APC.
• user-configured-ssid [SSID]: Entered SSID (An AP that has SSID
as SSID_NAME is classified as a friendly type unauthorized AP.)
SSID_NAME SSID that is used when the SSID_TYPE is entered as user-
configured-ssid
To check the configured information, use the 'show wids device rule
managed' command.
359