Figure 240. Configuration Window For Unauthorized Station Detection Option - Samsung WEC8500 Operation Manual

In the configuration screen, operator can check Option and click Apply for configuration.
Figure 240. Configuration Window for Unauthorized Station Detection Option
Unauthorized Channel Validation Configuration
The unauthorized channel validation function helps an operator detect an AP that uses
an unauthorized channel other than configured channels. The configuration procedure is
as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# channel-validation
2
WEC8500/configure/wi/channel-validation# enable
3
4
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Channel Validation> menu in the sub-menus. And then,
operator can configure the SERVICE STATE and Valid Channel List in the screen.
Operator can change configuration after changing the SERVICE STATE and Valid
Channel List and clicking Apply.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  wi  channel-validation configuration mode of CLI.
Enable the unauthorized channel validation function.
Configure an authorized channel.
o add [CHANNEL]
Parameter
CHANNEL
To check the changed configuration, execute the following command:
o show wi current-config
Description
Authorized channel number (For example, add 2, 3, 4)
368