Samsung WEC8500 Operation Manual page 254

Enter the following command to configure the network bandwidth of a DHCP IPV6 pool
to serve. After entering a separator '/' after an IPV6 address, enter the length of a prefix.
•
[Configuring Gateway]
This command configures the gateway address of a DHCP client. Enter 'no' parameter to
delete a configured address.
•
•
[Configuring IPV6 DNS Server]
Up to 3 IP addresses can be configured for a DNS server.
•
[Configuring DNS Server]
Up to 3 IP addresses can be configured for a DNS server. Enter 'no' parameter to delete
a configured DNS server. The lower command 'all' is used to delete all the IP addresses
of a configured DNS server.
•
•
•
[Configuring Domain Name]
This command configures or deletes a domain name.
•
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
network [IPV6_ADDRESS]/[PREFIX]
Parameter
IPV6_ADDRESS
PREFIX
default-router [IP_ADDRESS]
no default-router
Parameter
IP_ADDRESS
dns-server [IP_ADDRESS]
Parameter
IP_ADDRESS
dns-server [IP_ADDRESS]
no dns-server [IP_ADDRESS]
no dns-server all
Parameter
IP_ADDRESS
domain-name [DOMAIN]
no domain-name [DOMAIN]
Parameter
DOMAIN
Description
IPV6 address
Length of Prefix
Description
Gateway IP address
Description
DNS Server's IP address
Description
DNS Server's IP address
Description
Domain name to configure (For example, samsung
235