Samsung WEC8500 Operation Manual page 233

Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2
WEC8500/configure/wlan 1# iot-enablement
WEC8500/configure/wlan 1# no iot-enablement
3
WEC8500/configure/wlan 1# iot-device-type [DEVICE_TYPE]
4
WEC8500/configure/wlan 1# iot-discovery-mode [MODE]
5
WEC8500/configure/wlan 1# iot-protocol [PROTOCOL]
6
WEC8500/configure/wlan 1# iot-protocol-port [RORT]
7
WEC8500/configure/wlan 1# iot-uplink-priority
WEC8500/configure/wlan 1# no iot-uplink-priority
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  wlan configuration mode of CLI.
Configure iot-enablement Enable/Disable.
Configure iot-device-type.
Parameter
cctv
Configure iot-discovery-mode.
Parameter
auto
static
Configure iot-protocol.
Parameter
udp
tcp
Configure the iot-protocol-port. (0 – 65535 )
Select iot-uplink-priority Enable/Disable.
Detailed uplink-priority can be configured in wlan-uplink-priority. This is
Description
CCTV
Description
Automatic Selection Mode
Static Mode
Description
Use UDP as the IoT protocol.
Use TCP as the IoT protocol.
214