[Retrieving APC Information added in cluster]
You can check the added APC information using the 'show cluster list-apc' command.
WEC8500# show cluster list-apc
=============================================================================
INDEX
APC-NAME
=============================================================================
1
APC-01
2
APC-02
=============================================================================
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Mobility Management> <Clustering> menu in the sub-menus.
The Clustering window is shown below.
Figure 211.
Clustering Window
Configure a clustering configuration value in the <Information> item and then click the
<Apply> button to apply. The Clustering Members item shows all the clustering members.
Click the <Add> or <Delete> button to add or delete a clustering member.
The clustering addition window is shown below.
Figure 212.
Clustering Addition Window
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Parameter
INDEX
IP-VER
IP-ADDRESS
IP-V4
90.90.194.111
IP-V4
90.90.194.121
Description
Index in cluster (range: 1-12)
DB-REF-INT CONNECT-STATUS
120
CONNECTED[1]
120
CONNECTED[1]
314