Managing Traffic Performance - Samsung WEC8500 Operation Manual

Managing Traffic Performance

You can manage the traffic performance statistics information and accumulated data for
the APC system and the interface of each AP.
Managing History Information
When the traffic performance information management is enabled, the APC system
creates history information at every 5 minute. But, if the data server information is not
configured, the history information is not transmitted to outside although it is created. Both
ftp and sftp protocols support on uploading data files.
Collecting Information
1
WEC8500# configure terminal
WEC8500/configure#
2
WEC8500/configure# stats-report enable
3
4
5
WEC8500/configure# stats-report upload start
Stopping Information Collection
1
WEC8500# configure terminal
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Configure the traffic performance information.
Configure a data server to transmit history information.
o stats-report target [IP_ADDRESS] [PATH] [ID] [PASSWORD]
port[PORT_NUMBER] serverType[ftp|sftp]
Parameter
IP_ADDRESS
PORT_NUMBER
ID
PASSWORD
PATH
serverType
To check the information
management, use the 'show stats-report conf' command.
Configure so that the performance information is uploaded to the FTP
server.
But, because the default is the 'start' status, this step may be skipped.
Go to the configure mode of the CLI.
Description
IP address of a target server
Port number of a target server
User ID of a target server
User password of a target server
File storage path of a target server
Target server type (ftp/sftp)
of traffic performance information
461