Samsung WEC8500 Operation Manual page 209

WEC8500/configure/ap ap_1# show ap upgrade list
/* (RC/FR/RC)
/* Pri : VersionPriority (MD-model,A-AP config)
AP_ID Model Version(config/current)
1 WEA302i 4.0.0.R/ 4.6.0.R
Configuration using CLI (Upgrade environment)
To configure AP upgrade related environment, the following command is provided:
First of all, go to the configure  AP-all  upgrade mode of CLI.
WEC8500# configure terminal
WEC8500/configure# ap-all
WEC8500/configure/ap-all# upgrade
WEC8500/configure/ap-all/upgrade#
[select-package]
This command configures a package to use during AP upgrade.
•
[target]
During entire upgrade, you can select whether to maintain individual configured AP
version of an AP or perform upgrade.
•
[transfer-protocol]
This command selects a transmission protocol that is used to transmit the package file of
an AP from the WEC8500 to the AP.
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
following command:
: RetryCount/FailReason/RebootCause
select-package [UPGRADE_TYPE] [FILE_NAME]
Parameter
UPGRADE_TYPE
FILE_NAME
Target [AP UPGRADE TARGET]
Parameter
UPGRADE TARGET
Transfer-protocol [AP TRANSFER MODE]
Status(RC/FR/RC)
Success( 0/ 0/146)
Description
Configures upgrade
upgrade/predownload)
• default: AP image that is referred to during provision
upgrade.
• quick-upgrade: AP image that is referred to for entire AP
upgrade upon an operator's request.
• predownload: AP image that is referred to download AP
image to AP during entire AP upgrade.
Image file name that will be used for AP upgrade
Description
Upgrade target (all/ keeping-individual)
• all: Perform upgrade for all the APs. (default)
• keeping-individual: While maintaining individually configured
ap version, perform upgrade for the rest APs.
Pri force
AP No
type (default/quick-
190