Figure 156. Wpa/Wpa2 802.1X Configuration (2) - Samsung WEC8500 Operation Manual

Item
FAILTHROUGH
2
Figure 156. WPA/WPA2 802.1x Configuration (2)
WPA/WPA2 802.1x Configuration
The WPA/WPA2 802.1x, one of wireless LAN authentication types does authentication
through an authentication server such as a Remote Authentication Dial-In User Service
(RADIUS) server.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Description
transmission function is disabled.
Enable/Disable FAILTHROUGH Option
Select AUTHENTICATION SERVER and ACCOUNTING SERVER as
Enable and configure the rest items.
If Fail Through is enabled in WLAN Setting and Accounting Server is
enabled, accounting report for each station is sent to the RADIUS Server
by which each station is authenticated.
For proper accounting operation, please set Accounting Server with
RADIUS Servers which are configured in Authentication Server.
Internal RADIUS Server
Operator can use a RADIUS server in the APC. The internal RADIUS
server only supports the authentication function and does not support
the accounting or aaa-override, and so on. To use an internal RADIUS
server, select 'Internal' when selecting a RADIUS server during
authentication server configuration.
Click the <L2> tab.
Select the L2 Security Type as WPA + WPA2 and AUTH KEY MGMT as
802.1x.
After configuring the rest values as required, click the <Apply> button.
For more information about detail configuration item of L2 tab, see '5.3.1
Initialization of WLAN Security Function'.
224