Samsung WEC8500 Operation Manual page 125

APC/configure# fqm-mode
2
APC# configure terminal
APC/configure# fqm-mode
access-list ip acl1 permit seq 1 icmp any any os-aware window7
3
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Apply the OS-AWARE to ACL. Use the 'no' parameter to delete the OS-
AWARE
o access-list [ip/ipv6/mac] [ACL_NAME] [deny/permit/time-profile] seq
[seq_NUM]
[1/*/ahp/eigrp/esp/gre/icmp/igmp/igrp/ip/nos/ospf/pcp/pim/17/6/tcp/u
dp/1-255] [any/A.B.C.D A.B.C.D] eq [eq_VALUE] [any/A.B.C.D
A.B.C.D] eq [eq_VALUE] os-aware[OS_AWARE NAME] [[[dscp [*|[0-
63]]|precedence [*|[0-7])]]]|]
o no access-list [ip/ipv6/mac] [ACL_NAME] [deny/permit/time-profile]
seq
[1/*/ahp/eigrp/esp/gre/icmp/igmp/igrp/ip/nos/ospf/pcp/pim/17/6/tcp/
udp/1-255] [any/A.B.C.D A.B.C.D] eq [eq_VALUE] [any/A.B.C.D
A.B.C.D] eq [eq_VALUE] os-aware[OS_AWARE NAME] [[[dscp [*|[0-
63]]|precedence [*|[0-7])]]]|]
Parameter
OS_AWARE NAME
An example of applying 'window7' to 'acl' is as follows:
To check the configuration information, use the 'show running-config
network' command.
Description
os-aware name to configure
[seq_NUM]
106