Samsung WEC8500 Operation Manual page 231

WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2
WEC8500/configure/wlan 1# 80211a
WEC8500/configure/wlan 1/80211a#
3
WEC8500/configure/wlan 1/80211a# rate [MODE][RATE]
4
WEC8500/configure/wlan 1/80211a# mcs-11n [RATE]
5
WEC8500/configure/wlan 1/80211a# mcs-11ac num-ss 2~4
enter the maximum MCS(7~9) for 1 spatial stream(s): 7
the maximum MCS : 7
enter the maximum MCS(7~9) for 2 spatial stream(s): 7
the maximum MCS : 7
enter the maximum MCS(7~9) for 3 spatial stream(s): 7
the maximum MCS : 7
enter the maximum MCS(7~9) for 4 spatial stream(s): 7
the maximum MCS : 7
[Wlan:1] Radio : 5GHz, number of SS: 4, max mcs : 7, 7, 7, 7
6
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Enter to 80211a or 80211b per the band to be set.
Configure the data rate. Each configuration described below can be set
if the corresponding wlan is disabled.
Parameter
MODE
RATE
Configure 802.11n MCS(Modulation and Coding Scheme) rate.
Parameter
RATE
Configure the 802.11ac MCS (Modulation and Coding Scheme) rate.
802.11ac MCS can configure only 5G band.
Configuration status can be confirmed through "show wlan detail #"
command.
Description
Mode (basic/supported)
• basic: Basic rate supported for a terminal to access to
an AP.
• supported: A connected terminal that supports the
supported rate can communicate with an AP at the
supported rate.
Data rate
• Range for 80211a: 6, 9, 12, 18, 24, 36, 48, or 54 Mbps
• Range for 80211b: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48,
or 54 Mbps
Description
MSC rate (range: 0-31)
Enable
212