Mac Filter - Samsung WEC8500 Operation Manual

MAC Filter

The W-EP wireless LAN system provides the MAC filter function. A user may experience
connection restriction due to MAC filtering when connecting to a specific WLAN (SSID).
Configuration using CLI
To configure a MAC list for connection control by the MAC filter, execute the command
as follows:
1
WEC8500# configure terminal
WEC8500/configure# security
2
WEC8500/configure/security# mac-filter [ID]
3
WEC8500/configure/security/mac-filter 1# policy [POLICY]
4
WEC8500/configure/security/mac-filter 1# mac [MAC_ADDRESS]
5
WEC8500/configure/wlan 1/security# mac-filter <MAC_FILTER_ID>
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  security configuration mode of CLI.
Creates a MAC filter list.
Parameter
ID
Configure the filtering policy.
Parameter
POLICY
Configure a MAC entry.
Parameter
MAC_ADDRESS
Specify the MAC filter ID that is configured in the WLAN to which a MAC
filter will be applied.
Parameter
MAC_FILTER_ID
Description
MAC filter list table ID (range: 1-20)
Description
Table policy of MAC filtering list
Description
MAC address (XX:XX:XX:XX:XX:XX format)
Description
MAC FILTER ID (range: 1-20)
396