WEC8500/configure# ap ap_2
4
WEC8500/configure/ap ap_2# profile ap-mode repeaterAp
5
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <General> menu in the sub-menus. To change authentication mode,
configure SECURITY in Repeater Service of the windows, select mode, and click the
<Apply> button.
Figure 144.
Root Service Management (1)
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP selection <General> menu in the sub-menus.
After selecting AP MODE item, click the <Apply> button and restart the AP.
Figure 145.
Root Service Management (2)
MCS Configuration Management by WLAN
This is a function of configuring data rate and MCS by WLAN. You can configure MCS,
etc. by each WLAN differently because it is necessary to configure MCS, etc. differently
depending on the types of services such as FMC.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
AP.
Configure it to a Repeat AP.
Restart the configured AP.
Go to configure WLAN configuration mode of CLI.
Go to 80211a or 80211b depending on the bandwidth to configure.
209