Samsung WEC8500 Operation Manual page 91

WEC8500/configure/router/ospf 2# network 100.100.100.1 255.255.255.0 area 3
ADDRESS
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Network> menu in the sub-menus.
Enter the NETWORK ADDRESS, NETMASK, and AREA ID and click the
<Apply> button.
Redistribute Configuration
Configuration using CLI
Go to configure  ospf configuration mode of CLI.
WEC8500/configure/router/ospf 2# ?
area
auto-cost
capability
compatible
default-information
default-metric
distance
distribute-list
exit
host
max-concurrent-dd
maximum-area
neighbor
network
ospf
overflow
passive-interface
redistribute
router-id
summary-address
timers
WEC8500/configure/router/ospf 2# redistribute ?
connected
static
ospf
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Parameter
NETWORK
NETMASK
AREA ID
OSPF area parameters
Calculate OSPF interface cost according to bandwidth
Enable specific OSPF feature
OSPF compatibility list
Control distribution of default information
Set metric of redistributed routes
Define an administrative distance
Filter networks in routing updates
Exit from router mode
OSPF stub host entry
Maximum number allowed to process DD concurrently
Maximum number of ospf area
Specify a neighbor router
Enable routing on an IP network
OSPF specific commands
Control overflow
Suppress routing updates on an interface
Redistribute information from another routing protocol
Router-id for the OSPF process
Configure IP address summaries
Adjust routing timers
Connected
Static routes
Open Shortest Path First (OSPF)
Description
Network number OSPF network prefix
OSPF wild card bits (network mask)
OSPF area ID as a decimal value/ OSPF area ID in IP address
format
72