Figure 234. Unmanaged Rule Addition Window - Samsung WEC8500 Operation Manual

2
Figure 234. Unmanaged Rule Addition Window
Manual Configuration (Move)
A user can change the classification of an unauthorized AP that is detected by the WI or
that is classified according to the rule configured by a user.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wi# device
WEC8500/configure/wi/device#
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Monitor> and then select the
<Wireless Intrusion>  <AP> menu in the sub-menus. And when the AP list is displayed,
select one out of the AP list to go to the detail view screen. In the detail view screen,
operator can manually change the classification of an AP by using the top down menu of
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
In the rule addition screen, operator can add a rule by entering the
information and click Apply.
Go to configure  wids  device configuration mode of CLI.
By using the MAC of an unauthorized AP to change, execute the move
command.
o move [MAC] [FROM] [TO]
Parameter
MAC
FROM
TO
To check the changed configuration, use the following command:
o show wi device ap list managed
o show wi device ap list unmanaged
Description
MAC address of a detected AP
Previous classification of a MAC
Classification to change
362