Figure 297. Ftp/Sftp Server Configuration - Samsung WEC8500 Operation Manual

Figure 297. FTP/SFTP Server Configuration
The FTP and SFTP can be configured using the Enable/Disable radio box.
For FTP, you can configure a port number that will be used for FTP by using 'PORT' and
can change the user name and password of a FTP server by entering 'USER',
'PASSWORD', or 'CONFIRM PASSWORD'. Enter an idle timeout value in 'IDLE
TIMEOUT'.
Also for SFTP, you can change the user name and password of a SFTP server by entering
'USER', 'PASSWORD', or 'CONFIRM PASSWORD'.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
432