Table of Contents
Advertisement
Quick Links
Base heater Control KIT
Installation manual
Base heater Control box AVR-M200FHAX / AVR-M200JHAX
• Thank you for purchasing this Samsung Product
• Before operating this unit, please read this Installation manual carefully and retain it for future
reference.
DB68-12029A-00_IM_ACC BASE HEATER Control KIT_AA_EN.indd 1
2022-09-06 오전 11:43:20
Advertisement
Table of Contents
Related Manuals for Samsung AVR-M200FHAX
Summary of Contents for Samsung AVR-M200FHAX
- Page 1 Base heater Control KIT Installation manual Base heater Control box AVR-M200FHAX / AVR-M200JHAX • Thank you for purchasing this Samsung Product • Before operating this unit, please read this Installation manual carefully and retain it for future reference. DB68-12029A-00_IM_ACC BASE HEATER Control KIT_AA_EN.indd 1...
-
Page 2: Table Of Contents
Contents Safety Information Installation Control box parts diagram Accessories Installing the control box [DVM S Series] Installing the control box [DVM S2 Series] How to connect the power terminals Wiring diagram Configuring the options of the outdoor unit for installation of Base heater and control box Cautions for base heater and control box Appendix Check items by error code... -
Page 3: Safety Information
Safety Information Safety Information Be sure to use copper wire as the power cable and use only WARNING the regulated parts for wiring. Be sure to check whether wiring has been properly made. • Cancer and Reproductive Harm - www.P65Warnings. ca.gov. -
Page 4: Installation
<AVR-M200JHAX> Product Body (1) Installation Guide (1) Relay Fuse Trans power Sub PCB Bracket Holder (1) M4 x L12 Screw (5) assembly <AVR-M200FHAX> Sub PCB Fuse assembly Relay Terminal block Unit: mm (inch) 60 (2.36) 120 (4.72) 145 (5.71) 39 (1.54) English DB68-12029A-00_IM_ACC BASE HEATER Control KIT_AA_EN.indd 4... -
Page 5: Installing The Control Box [Dvm S Series]
Control Box Installation Installing the control box [DVM S Series] • Installation in a large DVM S model Fasten the bracket to the to the control box's body using the supplied screws. The bracket should be installed on the left for Small DVM S Models and on the right for Larger DVM S Models. - Page 6 Control Box Installation Secure the motor wire that connects to the control box on • Securing the wires for large DVM S models large DVM S outdoor units using the factory installed wire holder. Be careful not to touch the control box's body. Transmission Line Transmission wires Power Line...
-
Page 7: Installing The Control Box [Dvm S2 Series]
Installing the control box [DVM S2 Series] • Installation in a DVM S2 X-Large model Fasten the bracket to the control box's body using the supplied screws. The bracket should be installed on the left of the control box. • Installation in a DVM S2 model Fasten the control box to the outdoor unit with supplied screws (3EA) for assembly. - Page 8 Control Box Installation Connect the transmission and power wires between the base heater control box and the outdoor unit control box. Transmission Line Power Line Secure the wires with the factory installed wire holders. Transmission wires Transmission Line (Main PBA CN807) Power Line Transmission wires (Main PBA CN807)
-
Page 9: How To Connect The Power Terminals
How to connect the power terminals Transmission Line Power Line • Secure the base heater wires as shown in the figure. • When wiring the base heater control box, use wire Transmission wires (Main PBA CN807) connectors with compression connection. Power supply wires •... -
Page 10: Wiring Diagram
TRANS (RED) 460V THERMOSTAT 1(L) 2(N) L BASE HEATER1 BASE HEATER2 • AVR-M200FHAX (For 220V) - DVM S Small / Large, DVM S2 Small / Large BASE HEATER MAIN C-BOX CN83 (RED) 4 3 2 1 B14 PBA CN81 (RED) - Page 11 TRANS (RED) 460V THERMOSTAT 1(L) 2(N) L BASE HEATER1 BASE HEATER2 BASE HEATER3 BASE HEATER4 • AVR-M200FHAX (For 220V) - DVM S2 X-Large S3 BASE HEATER MAIN C-BOX CN83 (RED) 4 3 2 1 B14 PBA CN81 (RED) CN48 (BLU)
-
Page 12: Configuring The Options Of The Outdoor Unit For Installation Of Base Heater And Control Box
Control Box Installation Configuring the options of the outdoor unit • In Segment 1 and Segment 2, the number of the selected option appears. for installation of Base heater and control box • In Segment 3 and Segment 4, the setting value of the selected option appears. -
Page 13: Cautions For Base Heater And Control Box
• To obtain the updated outdoor unit firmware, please reach out to your local Samsung HVAC service or distribution center. ※ When ODU is working on "Base Heater testing mode", or In normal "base heater working" condition, never touch the heater or a part near the base plate. -
Page 14: Appendix
Check items by error code Check items by error code Symptom During the Heat mode or the heater test run, the temperature on the heater does not increase. 1) Connection error 2) Outside temperature sensor error Cause 3) Heater power connection error 4) Relay operation error The connector is properly Check operation after connecting the... - Page 15 Symptom The heater operates normally at the outside temperature of 5 °C (41 ℉) or higher? 1) Test run Cause 2) Outside temperature sensor error 3) Relay operation error Commissioning is in progress? It operates normally. Check operation after removing foreign The outside temperature materials, or connecting or replacing the sensor operates normally? sensor.
- Page 16 DB68-12029A-00 DB68-12029A-00_IM_ACC BASE HEATER Control KIT_AA_EN.indd 16 2022-09-06 오전 11:43:24...